What Your Need to Know About Metalizing Paint
Metalizing paint, or thermal paint, involves the application of a thin layer of metallic coating right on top of a substrate; it gives an additional protective on to the material against physical wear and corrosion. The most common metals used are alloys, aluminium and zinc. The metals are heated electronically, or with the traditional way of flaming, and are sprayed right on top of the substrate; by this time, the substrate has already gone through proper surface preparation.
Metalizing paint is the an effective protection for metals and concrete surfaces against corrosion; before you think about metalizing paint, make sure that the surface you intend it for can hold its own against the cleaners and blasts during the application. In metalizing paint, pure aluminium and zinc-aluminum alloy are incredibly effective marine coatings. Metalizing paint is typically applied on to areas or structures like lock and dams, bridges, piers and many other onshore and offshore facilities.
Why Decide to Get Metalizing Paint
Due to the fact that the entire metalizing process doesn’t involve any kind of solvent, there’s no possibility of volatile organic compound (VOC) emission. Hundreds of owners and painters are looking into all the options to limit the emission of VOCs from their process since environmental regulations are against it. Metalizing has increased in popularity due to the circumstance; apart from not emitting VOCs, metalizing projects also doesn’t require cure times. As soon as an asset completes the metalizing process, it can be put back in service; this is a major advantage for establishments that incurs losses when these down times happen.
Whatever may be the conditions of the surroundings or the area, the metalizing process won’t be hindered; unlike other paint-based coatings, metalizing can be applied matter the level of humidity or temperature, all thanks to the metals and alloys. So as another advantage metalizing projects can be done whatever the seasons or whether might be, may it rains cats and dogs or the heat of the sun becomes too much and everything in between; the only real concern will be the safety of the workers.
Even though metalizing is often compared to hot-dip galvanisation due to a handful of similarities, metalizing still has advantages over the other process. The initial advantage is that metalizing is a better solution for bigger structures thanks to the spray application that it uses; even though deconstruction is not all the cost-effective or possible. Under metalizing, the substrate remains cool since it’s just a spray application unlike when it goes under hot-dip galvanisation; there’s no actual risk of distortion or damage to the substrate when metalizing is applied.